Conformal coating process equipment

SCH Technologies supply a range of process equipment for control of the conformal coating production line from start to finish.

They include:

  • Ionic test systems for cleanliness testing
  • Dyne pens for surface energy testing
  • Viscosity equipment for control of liquid coating
  • Conformal coating thickness testing

This allows SCH to offer the complete conformal coating solution regardless of the needs of the customer.

In conformal coating of circuit boards there are times when the process needs to be controlled to avoid problems. This can be before, during and after application.


CT100 Metronelec ionic contamination test system CT1000andlaptop_000

The CT100 is designed to make simple and accurate ionic contamination tests for Printed Circuit Boards (PCBs) for cleanliness measurements in fully compliance with MIL-P-28809, MIL-STD-2000A, DEF-STD 10/03 IPC-TR-583, IES standards.

Ideal for controlling cleanliness levels of circuit boards before the conformal coating process.

Click CT100 Metronelec ionic contamination test system for further information.


DynePentestingsurfaceenergyofcircuitboardbeforeconformalcoatingDyne pens for conformal coating surface energy and cleanliness testing

 

The surface energy of the circuit board can really affect the quality of the conformal coating finish. Defects like delamination, de-wetting, and conformal coating peeling off easily in sheets can be related to poor surface energy.

You can measure the surface energy of the board using dyne pens and it can help determine if problems are going to be found in the conformal coating production.


Positector 6000 conformal coating thickness system Positesterconformalcoatingthicknessmeasurementsystem

The Positector 6000 is a rugged, fully electronic coating thickness gauge which uses magnetic and eddy current principles to measure conformal coating thickness on both ferrous and non-ferrous metals, accurately, and quickly.

Measurement of the conformal coating after application is complete and the coating is dry enough to handle is achieved using a non contact technique using eddy currents. A system like the positest offered by SCH is extremely quick and accurate to ±1 um at thin films of 25-50 um.

Click Positector 6000 conformal coating thickness system for further information.


Links for further information


Equipment links

Require a specific type of system or piece of equipment? Then take a look at the range of products below to help you find what you need.

Spray Booths for applying conformal coatings, lacquers and paintsInline Dip Coating Systems for applying conformal coatings, lacquers and paintsFloor Standing Dip Coating Systems for applying conformal coatings, lacquers and paintsBench Top Dip Coating Systems for applying conformal coatings, lacquers and paintsAutomated Optical Inspection Systems for examining conformal coatings, lacquers and paints Manual Inspection Booth for examining conformal coatings, lacquers and paints under UV lightsStripping Systems for removal of conformal coatings, lacquers and paintsStorage Cupboards for drying conformal coatings, lacquers and paintsUltraviolet (UV) Conveyors for curing conformal coatings, lacquers and paintsMeasurement Systems for measuring conformal coatings, lacquers and paints thicknessSolvent Monitors for measuring solvent emissions from conformal coatings, lacquers and paints