Name: VanAcrylic Micro-Abrasive Blasting Media
SKU: 11572
Availability: InStock

VanAcrylic Micro-Abrasive Blasting Media

excl. VAT

High-performance VanAcrylic thermoset blasting media designed specifically for safe, ESD-controlled removal of Parylene and liquid conformal coatings from PCBs. Uniform 80/100 grit for predictable results with the Vaniman ProBlast 3 ESD system.

Sold in 1, 5 and 30 lb packs.

SKU: N/A Category: Media

Description

VanAcrylic 80/100 grit is a purpose-engineered thermoset plastic micro-abrasive designed specifically for electronics rework. It delivers fast, controlled removal of Parylene and liquid conformal coatings from printed circuit boards while protecting sensitive components, solder joints, and solder resist.

Developed for use with the Vaniman ProBlast 3 ESD, VanAcrylic combines stable electrostatic control with uniform particle sizing to provide predictable removal rates, repeatable results, and a significantly lower risk of substrate damage compared with mineral abrasives such as aluminium oxide.

Why choose VanAcrylic?

Electronics-grade media — formulated for PCB rework, not general blasting
ESD-controlled performance when used with ProBlast 3 ESD
Uniform 80/100 grit for consistent removal behaviour
Lower surface aggressiveness than aluminium oxide
Solvent-free process — avoids chemical handling and disposal
Clean, predictable results across acrylic, urethane, silicone and Parylene

Typical applications

Parylene rework and selective removal
Conformal coating stripping for inspection or repair
Exposing test points, pads or vias
Localised rework around connectors and fine-pitch components
Pre-inspection cleaning after coating failure analysis

IMPORTANT NOTE ON USAGE: For best performance with a Vaniman sandblaster, use VanAcrylic in the 50–100 µm sand tank with a large violet nozzle tip on the handpiece. Other combinations may lead to blockage or poor blasting performance.

Pack sizes

1 lb bag — ideal for trials, small jobs, or first fills
5 lb bag — cost-effective for routine production use
30 lb bag — best value for higher-volume users

Recommended system pairing

For the cleanest, safest, and most repeatable results, use VanAcrylic media with the Vaniman ProBlast 3 ESD Complete System (ProBlast + StoneVac II). This gives you:

Stable ESD control during blasting
Consistent airflow and media delivery
HEPA dust capture at source
Cleaner workspace and safer operator environment
Turnkey setup with matched components

👉 View the ProBlast 3 ESD Complete System →

🇬🇧 Online checkout is currently available for mainland UK only.

🇪🇺 EU or international customers: please contact SCH directly for pricing, shipping, and lead times.

📞 Call: +44 (0)1226 249019 | ✉ sales@schservices.com | Contact us →

Additional information

Weight	N/A
Weight	1lb Bag (Single Tank), 5lb Bag, 30lb Bag

Technical Specification

Product name: VanAcrylic Micro-Abrasive Blasting Media
Media type: Thermoset plastic micro-abrasive
Grit classification: 80/100 mesh
Particle size (approx): 150–180 microns (typical for 80/100 grit)
Pack sizes: 1 lb, 5 lb and 30 lb bags
Material: Thermoset polymer (VanAcrylic)
Compatible systems: Vaniman ProBlast 3 ESD and similar micro-abrasive blasters
Typical uses: Parylene removal, conformal coating stripping, and selective rework
ESD control: Use with grounded equipment and appropriate LEV extraction
Regulatory & safety: Refer to the Safety Data Sheet (SDS) for PPE, handling, and disposal
Storage: Keep dry, sealed, and stored at moderate temperature

IMPORTANT USAGE NOTE:
For best performance in Vaniman sandblasters, VanAcrylic should be used with the 50–100 µm sand tank and a large violet nozzle tip on the handpiece. Other combinations may result in blockage or reduced blasting performance.

VanAcrylic Blasting Media — Safety Data Sheet (SDS)

This Safety Data Sheet (SDS) provides essential health, safety, and environmental information for VanAcrylic micro-abrasive blasting media used in micro-abrasive cleaning and selective conformal coating and Parylene removal on printed circuit boards (PCBs).

Please review the SDS before use to ensure correct handling, storage, personal protective equipment (PPE), exposure controls, and disposal practices are followed on your site.