What are the different methods available for cleaning electronic circuit boards?

June 29, 2017 Blog, conformal coating

SCH

The topic of cleaning printed circuit board assemblies (PCBAs) effectively before application of conformal coating can be daunting. This is because the process of cleaning circuit boards can be difficult especially with so many variables to consider.

When considering cleaning the circuit you need to assess many factors including:

The board and component compatibility with the cleaning method
The ability of the cleaning method to remove the contamination effectively from the circuit
Any residues the cleaning process may leave behind that may be harmful to the circuit in the long term.
The reasons for cleaning the circuit (e.g. contamination removal, adhesion promotion etc.)?

After considering these factors you can compare with the processes available.

The main methods of cleaning printed circuit boards

The main methods of cleaning used in everyday electronics processing before conformal coating application can include:

Aqueous washing
Semi-aqueous washing
Solvent & chemical washing
Plasma surface cleaning

These processes can be mixed, the method can be varied but the fundamental concepts still apply.

However, whatever method you choose you still have to consider that the key to success in cleaning circuit boards is similar to the success made with conformal coating.

You need to match the cleaning process, the cleaning materials and the circuit board together.

If you do this then this will give you the best results for cleaning the circuit board assembly.

Want to find out more about cleaning?

Or, read more on cleaning circuit boards on our website now.

Five key facts about using fluoropolymer Nano-coatings for protecting printed circuit boards

June 15, 2017 Blog, Fluoropolymer

June15-3

A Nano-coating is hydrophobic. It repels water from the surface of the circuit board and water will not wet the circuit.
The Nano-coatings are extremely thin (<2um). They are very different to traditional conformal coatings.
Nano-coatings do not require masking. The circuit board can be completely submerged in the liquid with no masking applied without damaging components.
They have excellent chemical resistance due its fluorine bonds. The Nano-coatings are perfect to protect against chemical attack.
Using a Nano-coating is a fast simple process. The coating can be dipped quickly, without masking, and the coating dries extremely fast.

Want to find out more about Nano-coatings?

Contact us to discuss your needs and let us explain how we can help you. Or, read more on Nano-coating technology for protecting circuit boards now.

Find out how we can help you with your conformal coating process now.

The ABCs of ultra-thin fluoropolymer coatings for electronic circuit boards

May 9, 2017 alternative, Blog, conformal coating, Fluoropolymer

Nano coatings are no mask conformal coatings with great water repellent properties

What is a fluoropolymer coating?

A fluoropolymer coating is typically comprised of fluorocarbons and characterised by carbon-fluorine bonds.

They have many interesting properties and especially for printed circuit boards.

However the three key properties for electronics are that the coatings are:

Hydrophobic
Chemically resistant
No masking required

These properties can be key to protecting the electronics and providing a highly cost effective production process.

Hydrophobic coating

Fluorocarbons are not susceptible to Van der Waals force.

This gives the coatings their signature characteristics. That is they are non-stick, hydrophobic and friction reducing.

Therefore, water does not like to wet the surface of the circuit board and this gives the circuit excellent protection.

Chemically Resistant

These fluorinated coatings are chemically inert.

Owing to the fluorine bonds, fluoropolymer coatings demonstrate a high level of durability as well as resistance to acids, bases and most solvents.

This gives the circuit board a high degree of protection from chemical attack.

No masking required

Finally, what is really interesting is that these properties are exhibited at ultra-thin film thicknesses.

Typically a dry film can be 1-2um or even less.

This means that masking generally is not required for circuit boards before application. Therefore, you can dip the whole product into the liquid and there is no issue with electrical contact.

This can lead to significant cost savings in production.

What other properties do the fluoropolymer coatings have that may be relevant in electronics?

SCHUK 2

As already mentioned these hydrophobic coatings have very specialised properties.

They can include:

Being highly hydrophobic (water repellent)
Having a high moisture barrier
Requiring no masking before application
Being highly oleophobic (oil repellent)
Having a high chemical resistance
Having a high lubricity
Having high dielectric properties
Providing high corrosion resistance
Providing good abrasion / wear resistance

Note, not all fluoropolymer coatings have all of the above properties. But, some coatings can in fact have almost all of the properties.

The fluoropolymer coatings are extremely flexible coatings and becoming more prolifically used throughout engineering.

What sectors of industry are fluoropolymer coatings being used in protecting electronics?

SCHUK3

Fluorinated coatings are used to protect electronics in almost all industrial sectors.

They include:

Aviation
Aerospace
Defence
Automotive
Industrial
Oil & Gas
LEDs
Medical
Optics
Telecommunications
White goods / Commercial

This list is limited and there are a lot more areas that they are used.

What are the major differences between a fluoropolymer coating and a conformal coating for protecting an electronic printed circuit board or assembly?

There are several key differences between a conformal coating and a fluoropolymer coating.

They include:

Hydrophobic Properties – A fluoropolymer coating is generally hydrophobic in nature. It repels water when the water is on the surface of the coating.
Extremely thin coating – The fluoropolymer coating is normally applied a lot thinner than a typical liquid conformal coating. This is due to its superior performance when repels liquids
No masking – Due to the extremely thin fluoropolymer coating applied (<1-2um), the components that normally require protecting (connectors, switches etc) from the insulating liquid conformal coating may not need to be masked for the fluoropolymer. The circuit board can be completely submerged in the liquid with no masking applied without fear of damaging the connections.
Simple process – No masking means an extremely fast application process
Fast drying – due to the thin nature of the fluoropolymer coating and the solvents normally used the coating dries extremely quickly.

Our UK Address

Contact by Telephone, Fax or Email

Our UK Address

Contact by Telephone, Fax or Email