Range of systems

Our conformal coating inspection booths are ideal work station for either a single or dual operators to inspect printed circuit boards that have been conformally coated.

The booths are also suitable for rework, de-masking, repair, and finishing circuit boards as part of the production process.


IB100 Single inspection booth

Ib100 conformal coating inspection booth from SCH Technologies

Standard features

  • Floor standing inspection booth with plinth for operator seating.
  • One set of twin UVA lighting tubes fitted in the ceiling enclosure behind a UV transmittable laminate panel for in-situ inspection, with individual switch.
  • Single spigot inlet for connection to suitable extraction, for low level use of solvent coatings.
  • Externally powder coated framework to give lasting cosmetic finish.


IB101 double inspection booth

IB101 Conformal coating inspection booth from SCH technologiesThe IB101 double inspection booth is ideal for dual operator inspection and finishing purposes or one operator with an inspection lamp.

Standard features

  • Floor standing inspection booth with plinth for operator seating.
  • Two sets of twin UVA lighting tubes fitted in the ceiling enclosure behind a UV transmittable laminate panel for in-situ inspection, with individual switch.
  • Dual spigot inlets for connection to suitable extraction, for low level use of solvent coatings.
  • Externally powder coated framework to give lasting cosmetic finish.

Downloads


Specification

DETAILS
IB100
IB101
Dimensions (approx) W x H x D 
1045mm x 1735mm x 850mm
1545mm x 1735mm x 850mm
Height of aperture: 
390 mm
390mm
Width of aperture: 
1000mm
1500mm
OPTIONS
Teflon coated interior panels for easy clean 
YES
YES
FACILITIES
Electricity
3A Single phase electricity supply
3A Single phase electricity supply
Extraction (0.5 m/s face velocity) 
420 cfm with one 150mm diameter extraction connection required
630 cfm with two 150mm diameter extraction connections required

Conformal coating inspection and finishing

Conformal coating inspection in a boothAn important point in the conformal coating process is the inspection and finishing of a printed circuit board.

To complete this process it is important to create the optimum environment where an operator can easily inspect the coated circuit boards without fatigue to body or eyes.

This provides the highest quality results for the conformal coating process and keeps the operator safe from the harmful effects of solvents.

Finishing is where conformal coating is applied by brush coating after de-masking or after conformal coating application processing where the quality of the coating finish can be improved to meet the IPC standards.

SCH Technologies have designed, manufactured, and utilise a range of purpose-built, compact UV inspection & finishing booths for conformal coating inspection that have been optimised to offer the best inspection environment without compromise to health & safety, coupled with ergonomic design to minimise operator fatigue.


Inspection FAQs


UV inspection links


Links


Contact us

If you would like to know more about coating services or other products and services offered and supported by SCH Technologies, please do not hesitate to contact us.

Call us on +44 1226 249019, email us at sales@schservices.com or click Contact Us to send us your requests.