Conformal coating Viscosity Control FAQs
Conformal Coating Viscosity Control - How do I control the variables
There are numerous factors which directly affect the conformal coating processes to greater
or lesser degrees. Those which have major impacts irrespective of the substrate / PCB and
assemblies include choice of coating material and method of application. Whether conformal
coating boards by dip, spray or brush methods the Viscosity and Temperature of the coating are
critical factors.
The consistency of the resultant conformal coating thickness, quality of finish and some physical properties can all be dependant on the viscosity of the material which varies with temperature. Material manufacturers state the viscosity range on their data sheets and usually recommend a dilution ratio with appropriate thinners deemed most suitable for the specific application method.
A quick, easy and cost effective way of controlling the final viscosity of any coating blend is using a measuring cylinder to accurately dilute the material and a flow cup to determine the resultant viscosity of the blend. Flow cups like the Zahn Cup have a fixed volume with accurately machined hole and by
immersing the cup in the mixed and settled solution the efflux time in
seconds - measured from initial withdrawal to the first interruption in flow - can be related
with temperature and subsequently converted to actual viscosity.
Zahn Cups and other methods of viscosity measurement can usually be supplied by SCH as full
kits incorporating the specific Zahn Cup to meet your exact requirement, a thermometer, a
stopwatch and a calibration certificate together with user instructions and conversion charts.
Our technical expertise is constantly available should your have concerns regarding issues with
coating performance, or any other problems involving conformal coatings, application and
equipment for current or future projects.
Click for the Conformal Coating Viscosity Control PDF
How do I read the Viscosity - Time graphs for the Humiseal Conformal Coatings
Humiseal provide graphs of conformal coating viscosity against time in seconds. This relationship is measured through a flow cup as described above. The time is measured for the conformal coating and compared to the line on the graph. Where the time intersects the plot, this indicates the approximate viscosity of the conformal coating.
The viscosity graph below shows the values of the 1R32A2 65cps material as a function of time.
Go to the Technical Libray Page to obtain the various Viscosity - Time Graphs for the Humiseal Materials
Is it possible to relate the various viscosity cups for measuring conformal coating viscosity?
There is a table for relating the times of each of the different cups including Shell, zahn and Ford. Click through to obtain the Viscosity Conversion Table.